What window replacement includes
- Replacement window installation alongside roofing or other exterior work.
- Help choosing material and style.
- Removal of the existing windows.
- Flashing and sealing for weather protection.
Why windows and roofs belong in the same plan
Roofs and windows both depend on flashing. Dormer windows, and windows tucked just under a roof edge or beside an addition's lower roof, share water-management details with the roof around them. When both are being replaced, one company being responsible for how the window flashing and roof flashing meet is better than two contractors each assuming the other took care of it.
Many Vienna homes date from the 1950s and 1960s, according to the Town's comprehensive plan, and some still have windows that are decades old. Others have a mix: original windows in the main house and newer ones in an addition. A roof project is a sensible time to look at the worst of them, with one schedule, one written scope and one point of contact.
Approvals in Vienna
Fairfax County's permit guidance lists direct replacement of existing windows and doors among residential work that doesn't need a building permit, while new window openings are treated as alterations. Inside the Town of Vienna, the Town lists bay windows among the modifications that go through its zoning and permit review. In the Windover Heights Historic District, exterior changes that aren't in-kind repair or replacement need a Certificate of Appropriateness. HOAs, where they exist, may set rules too. We'll help you check before ordering.
How a replacement is done
The old window comes out, the opening is checked for damage or rot, and the new window goes in level, plumb and square. The most important part is the one you won't see afterward: flashing and sealing around the opening so water that gets behind the siding is directed back out. Under a roof edge or in a dormer, that flashing has to work with the roof flashing above it.
The photo at the top of this page is from a Roofing Roughnecks re-roof in Reston: underlayment and flashing being worked around a dormer, the kind of roof-to-wall detail that matters where windows and roofing meet.
Choosing replacement windows
- Start with the style the house already has, especially on the street-facing side.
- Decide whether you're replacing every window or only the worst ones.
- Ask what's included around the opening: trim, flashing, sealing and interior finish.
- Confirm product, size and color for each opening in the written scope.
Typical cost range
The Roofing Roughnecks cost guide lists $500–$1,200 per window as a typical Northern Virginia reference range for replacement windows installed alongside roofing and exterior work. Window type, size, material and the condition of the opening decide where yours falls. It's a reference range, not a quote.
Related pages
Do you replace windows without a roofing project?▸
Window replacement is offered alongside roofing and other exterior work. Tell us what you have in mind and we'll let you know if it's a fit.
Do replacement windows need approval in Vienna?▸
Direct replacement of existing windows doesn't need a building permit under Fairfax County's guidance, but new openings, bay windows in the Town, Windover Heights properties and HOA rules can all add a review step.
Why does window flashing matter?▸
Flashing directs water around the opening instead of into the wall. Caulk alone isn't a substitute for properly installed flashing.
Talk to a roofer about your Vienna home
Call (703) 731-9208, Monday – Saturday, 8:30 AM – 6:00 PM, or use the request-an-estimate page. We look at the roof first and put the recommended scope in writing before any work starts.
Request an Estimate